The P&L Stainless Steel Braided Power Steering Line has been track tested and proven to withstand the heat put out by the turbo and exhaust components. This heat would usually lead to anything from viscosity changes all the way to steering rack and pump failures. This line is specific for the steering rack to the power steering pump, otherwise known as the high pressure line. This is an excellent upgrade for anyone planning on running a variety of intake, inlet and intercooler setups. Manifold reversal modifications are simplified by the flexibility this line allows as well.
02-07 WRX/STI w/ Stock Location Turbo – Choose “Stock Location”
02-07 WRX/STI w/ Rotated Turbo – Choose “Rotated”
08-14 WRX & 08-Current STI w/ Stock Location Turbo – Choose “Stock Location”
08-14 WRX & 08-Current STI w/ Rotated Turbo – Choose “Stock Location”
This line requires the hardline which is attached to the rack to be slightly bent for proper installation.
The two There are two varieties of this line depending on your turbo setup. We have one for stock location turbos which is 4″ longer All 2008+ Subaru Models require the longer line (stock location).
NOTE: This is the high pressure power steering line ONLY. We do not manufacture a low pressure line at this time.