|
P&L Motorsports.
offers many different services in its exclusive well
maintained facility. From the basic bolt on to the complete
race car. Listed below you will find some of the services
we offer to our valued customers. These services and others
are routine jobs that are completed here at P&L Motorsports.
P&L Motorsports professional services, with
our ASE Certified Technicians, are very reasonable. Labor
rates are quoted per job. Some labor maybe be quoted from
previous experience on vehicles. Certain jobs may run
longer due to parts that need custom modification to fit the
according vehicle. All additions will be brought to the
attention of the customer before work is to be completed. For
all customers that purchase products from P&L Motorsports to
be installed at our facility, discounted labor rates are
available Labor Rates for P&L
Motorsports Services are listed below.
For other
projects or work needed, please contact us.
Installation and Labor Rates:
|
Size |
Pricing |
|
Installation & Service |
$95/hr |
|
Fabrication |
$100/hr |
|
Vehicle Diagnostic fee |
$50/hr |
|
 In
typical fashion, when we do make investments in tools, we always do our research
and purchase the best tools we can for our customers! For years, we've
been doing track prep for our customers. We've now taken it one step
further, allowing us to properly service all of our customers, conveniently, on
site!
Snap-On/John Bean's Visualiner products are state
of the art. Allowing for full three dimensional analysis of a vehicles
rolling geometry, the 3D-EL series can go as far as diagnosing frame issues,
damaged spindles, bearings, and other aspects of a vehicles suspension system.
For a limited time, we'll be offering a free
alignment inspection and report with services performed! Get a hold of us
for more details!
Below, you'll find just some of the things this,
state of the art, piece of technology brings!
You can see some of the reporting examples
available for you!
  
Main Features
|
- Zoom Readings
- Individual Camber
- Individual Toe
- Individual Caster
- Front Caster (-28° to +28°)
- Front and Rear Camber (-15° to +15°)
- Advanced Alignment Measurements with
Reading/Specifications and Cross Values
- A-Arm Adjustments
- Elevated Adjustments
- 4-Wheel Steer Adjust
- Rear Shim Programs
- Ride Height
- Custom Vehicle Specifications
- Multiple Units of Measure
- Caster and
SAI on
Turntables
-
SAI Elevated
- Live Caster, Camber and Toe -
Turntables
- Live Caster, Camber and Toe -
Elevated
- NorthStar Shim Program
- Light Truck Bushing
- iShop™, ShopKey™, ASANet™ Compatible
|
Measurements
|
- Front Readings
- Rear Readings
- All Readings
-
SAI and Thrust
Angle
- Included Angle
- Toe Out On Turns
- Front and Rear Toe
- FrameCheck™ Light Truck Frame Angle
|
|
